Non-local metasurfaces for spectrally decoupled wavefront manipulation and eye tracking.

Metasurface-based optical elements typically manipulate light waves by imparting space-variant changes in the amplitude and phase with a dense array of scattering nanostructures. The highly localized and low optical-quality-factor (Q) modes of nanostructures are beneficial for wavefront shaping as they afford quasi-local control over the electromagnetic fields. However, many emerging imaging, sensing, communication, display and nonlinear optics applications instead require flat, high-Q optical elements that provide substantial energy storage and a much higher degree of spectral control over the wavefront. Here, we demonstrate high-Q, non-local metasurfaces with atomically thin metasurface elements that offer notably enhanced light-matter interaction and fully decoupled optical functions at different wavelengths. We illustrate a possible use of such a flat optic in eye tracking for eyewear. Here, a metasurface patterned on a regular pair of eye glasses provides an unperturbed view of the world across the visible spectrum and redirects near-infrared light to a camera to allow imaging of the eye.

Density Functional Theory Study of Optical and Electronic Properties of (TiO2)n=5,8,68 Clusters for Application in Solar Cells.

A range of solution-processed organic and hybrid organic-inorganic solar cells, such as dye-sensitized and bulk heterojunction organic solar cells have been intensely developed recently. TiO2 is widely employed as electron transporting material in nanostructured TiO2 perovskite-sensitized solar cells and semiconductor in dye-sensitized solar cells. Understanding the optical and electronic mechanisms that govern charge separation, transport and recombination in these devices will enhance their current conversion efficiencies under illumination to sunlight. In this work, density functional theory with Perdew-Burke Ernzerhof (PBE) functional approach was used to explore the optical and electronic properties of three modeled TiO2 brookite clusters, (TiO2)n=5,8,68. The simulated optical absorption spectra for (TiO2)5 and (TiO2)8 clusters show excitation around 200-400 nm, with (TiO2)8 cluster showing higher absorbance than the corresponding (TiO2)5 cluster. The density of states and the projected density of states of the clusters were computed using Grid-base Projector Augmented Wave (GPAW) and PBE exchange correlation functional in a bid to further understand their electronic structure. The density of states spectra reveal surface valence and conduction bands separated by a band gap of 1.10, 2.31, and 1.37 eV for (TiO2)5, (TiO2)8, and (TiO2)68 clusters, respectively. Adsorption of croconate dyes onto the cluster shifted the absorption peaks to higher wavelengths.

Advances in Optical Detection of Human-Associated Pathogenic Bacteria.

Bacterial infection is a global burden that results in numerous hospital visits and deaths annually. The rise of multi-drug resistant bacteria has dramatically increased this burden. Therefore, there is a clinical need to detect and identify bacteria rapidly and accurately in their native state or a culture-free environment. Current diagnostic techniques lack speed and effectiveness in detecting bacteria that are culture-negative, as well as options for in vivo detection. The optical detection of bacteria offers the potential to overcome these obstacles by providing various platforms that can detect bacteria rapidly, with minimum sample preparation, and, in some cases, culture-free directly from patient fluids or even in vivo. These modalities include infrared, Raman, and fluorescence spectroscopy, along with optical coherence tomography, interference, polarization, and laser speckle. However, these techniques are not without their own set of limitations. This review summarizes the strengths and weaknesses of utilizing each of these optical tools for rapid bacteria detection and identification.

A History of Flexible Gastrointestinal Endoscopy.

Surgeons have been involved, since the beginning, in the development and evolution of endoscopy. They have been instrumental in developing new methods and have been actively involved in most of the therapeutic applications. The continued evolution of endoscopic technique is inevitable and will involve the integration of new technology with innovative thinking.

Color-Tunable Organic Light Emitting Diodes for Deep Blue Emission by Regulating the Optical Micro-Cavity.

Nowadays, most blue organic light emitting diodes (OLEDs) are fabricated by using sky-blue emitters which are more easily synthesized when compared with other deep blue emitters. Herein, we put forward a new idea of using an optical micro-cavity based on metal electrodes to regulate electroluminance (EL) spectra of sky-blue organic light emitting diodes to obtain a saturated deep blue emission with a narrowed full-width at half-maximum (FWHM). First, we simulate micro-cavity OLEDs and find that the transmission of the anode plays an important role in the forward emission. Meanwhile, the optical path of micro-cavity OLEDs as well as the phase shifting from electrodes influence the EL spectra and induce the extra intensity enhancement. The results show that when the resonant cavity optical path is regulated by changing the thickness of emitting layer (EML) from 25 nm to 75 nm in the micro-cavity, the EL peak of blue OLEDs has a redshift from 479 nm to 493 nm with FWHM shifting from 69.8 nm to 83.2 nm, when compared to the device without the micro-cavity, whose approximate EL peak and FWHM are 487 nm and 87 nm, respectively. However, the efficiency of electroluminescence decreases in micro-cavity OLEDs. We speculate that this is on account of the ohmic contact between ITO and Ag, the surface plasma effect and the rough morphology induced by Ag electrodes.

Sensing Senses: Optical Biosensors to Study Gustation.

The five basic taste modalities, sweet, bitter, umami, salty and sour induce changes of Ca2+ levels, pH and/or membrane potential in taste cells of the tongue and/or in neurons that convey and decode gustatory signals to the brain. Optical biosensors, which can be either synthetic dyes or genetically encoded proteins whose fluorescence spectra depend on levels of Ca2+, pH or membrane potential, have been used in primary cells/tissues or in recombinant systems to study taste-related intra- and intercellular signaling mechanisms or to discover new ligands. Taste-evoked responses were measured by microscopy achieving high spatial and temporal resolution, while plate readers were employed for higher throughput screening. Here, these approaches making use of fluorescent optical biosensors to investigate specific taste-related questions or to screen new agonists/antagonists for the different taste modalities were reviewed systematically. Furthermore, in the context of recent developments in genetically encoded sensors, 3D cultures and imaging technologies, we propose new feasible approaches for studying taste physiology and for compound screening.

Nanoaperture fabrication via colloidal lithography for single molecule fluorescence analysis.

In single molecule fluorescence studies, background emission from labeled substrates often restricts their concentrations to non-physiological nanomolar values. One approach to address this challenge is the use of zero-mode waveguides (ZMWs), nanoscale holes in a thin metal film that physically and optically confine the observation volume allowing much higher concentrations of fluorescent substrates. Standard fabrication of ZMWs utilizes slow and costly E-beam nano-lithography. Herein, ZMWs are made using a self-assembled mask of polystyrene microspheres, enabling fabrication of thousands of ZMWs in parallel without sophisticated equipment. Polystyrene 1 µm dia. microbeads self-assemble on a glass slide into a hexagonal array, forming a mask for the deposition of metallic posts in the inter-bead interstices. The width of those interstices (and subsequent posts) is adjusted within 100-300 nm by partially fusing the beads at the polystyrene glass transition temperature. The beads are dissolved in toluene, aluminum or gold cladding is deposited around the posts, and those are dissolved, leaving behind an array ZMWs. Parameter optimization and the performance of the ZMWs are presented. By using colloidal self-assembly, typical laboratories can make use of sub-wavelength ZMW technology avoiding the availability and expense of sophisticated clean-room environments and equipment.

Optical biosensors based on refractometric sensing schemes: A review.

Biosensor technology is an active field of research and development presenting rapid progress in recent decades, and the subfield of optical biosensors based on refractometric sensing schemes has developed dramatically during this time. This review focuses on advances in the refractometric sensing-based guided-wave optical biosensors particularly in the last two decades. It starts with a concise discussion on the underlying principles of label-free refractometric biosensor. Subsequently, advances in biosensor design, especially the transducer configuration and the integration of the sensing device are reviewed, highlighting the challenges and efforts dedicated to improving this technology. Various surface functionalization strategies designed to produce well-defined and reproducible surface properties are introduced for evaluation. Refractometric sensing scheme-based optical biosensors have found versatile applications varying from environmental monitoring and food safety to clinical diagnostics, together with advances in these applications and others are described. This paper concludes with a brief discussion on the outlook for integrating biosensors with emerging technologies.

A Review: Photonic Devices Used for Dosimetry in Medical Radiation.

Numerous instruments such as ionization chambers, hand-held and pocket dosimeters of various types, film badges, thermoluminescent dosimeters (TLDs) and optically stimulated luminescence dosimeters (OSLDs) are used to measure and monitor radiation in medical applications. Of recent, photonic devices have also been adopted. This article evaluates recent research and advancements in the applications of photonic devices in medical radiation detection primarily focusing on four types; photodiodes - including light-emitting diodes (LEDs), phototransistors-including metal oxide semiconductor field effect transistors (MOSFETs), photovoltaic sensors/solar cells, and charge coupled devices/charge metal oxide semiconductors (CCD/CMOS) cameras. A comprehensive analysis of the operating principles and recent technologies of these devices is performed. Further, critical evaluation and comparison of their benefits and limitations as dosimeters is done based on the available studies. Common factors barring photonic devices from being used as radiation detectors are also discussed; with suggestions on possible solutions to overcome these barriers. Finally, the potentials of these devices and the challenges of realizing their applications as quintessential dosimeters are highlighted for future research and improvements.

Special Section Guest Editorial: Translational Biophotonics.

This guest editorial introduces the special section on Translational Biophotonics.

Ultraflexible Nanowire Array for Label- and Distortion-Free Cellular Force Tracking.

Living cells interact with their immediate environment by exerting mechanical forces, which regulate important cell functions. Elucidation of such force patterns yields deep insights into the physics of life. Here we present a top-down nanostructured, ultraflexible nanowire array biosensor capable of probing cell-induced forces. Its universal building block, an inverted conical semiconductor nanowire, greatly enhances both the functionality and the sensitivity of the device. In contrast to existing cellular force sensing architectures, microscopy is performed on the nanowire heads while cells deflecting the nanowires are confined within the array. This separation between the optical path and the cells under investigation excludes optical distortions caused by cell-induced refraction, which can give rise to feigned displacements on the 100 nm scale. The undistorted nanowire displacements are converted into cellular forces via the nanowire spring constant. The resulting distortion-free cellular force transducer realizes a high-resolution and label-free biosenor based on optical microscopy. Its performance is demonstrated in a proof-of-principle experiment with living Dictyostelium discoideum cells migrating through the nanowire array. Cell-induced forces are probed with a resolution of 50 piconewton, while the most flexible nanowires promise to enter the 100 femtonewton realm.

Grant Funding Needs Parallel the Start-Up Venture: An Analogy for Translational Research Success.

This editorial offers some ways to think about how best to position a research group for funding, by examining the parallels between what is needed for translational grants versus industry start-ups.

Efficient Charge Transport in Disordered Conjugated Polymer Microstructures.

A new class of conjugated polymers with high charge mobilities exhibits the apparently conflicting morphological features of increased order at the molecular scale while lacking long-range order and crystallinity. To exploit their unique properties, mechanistic insights for charge transport events taking place from the molecular to the device scale must be uncovered. Thus, a central contributor to the continued progress in conjugated optoelectronic materials will be the development of advanced characterization tools, particularly those targeted to measuring the charge-transfer processes in heterogeneous, anisotropic, and hierarchically structured materials. This feature article describes the morphological properties that make partially ordered polymers an intriguing materials system to explore connections between chemical identity, solid-phase microstructure, and hierarchical charge transport. To this end, recent directions in materials development and new opportunities for characterization are discussed.

Biomedical Optics Scientific Community.

The new Editor-in-Chief, Brian Pogue, gives an overview of the biomedical optics community.

Utilizing the power of Cerenkov light with nanotechnology.

The characteristic blue glow of Cerenkov luminescence (CL) arises from the interaction between a charged particle travelling faster than the phase velocity of light and a dielectric medium, such as water or tissue. As CL emanates from a variety of sources, such as cosmic events, particle accelerators, nuclear reactors and clinical radionuclides, it has been used in applications such as particle detection, dosimetry, and medical imaging and therapy. The combination of CL and nanoparticles for biomedicine has improved diagnosis and therapy, especially in oncological research. Although radioactive decay itself cannot be easily modulated, the associated CL can be through the use of nanoparticles, thus offering new applications in biomedical research. Advances in nanoparticles, metamaterials and photonic crystals have also yielded new behaviours of CL. Here, we review the physics behind Cerenkov luminescence and associated applications in biomedicine. We also show that by combining advances in nanotechnology and materials science with CL, new avenues for basic and applied sciences have opened.

Modern trends in biophotonics for clinical diagnosis and therapy to solve unmet clinical needs.

This contribution covers recent original research papers in the biophotonics field. The content is organized into main techniques such as multiphoton microscopy, Raman spectroscopy, infrared spectroscopy, optical coherence tomography and photoacoustic tomography, and their applications in the context of fluid, cell, tissue and skin diagnostics. Special attention is paid to vascular and blood flow diagnostics, photothermal and photodynamic therapy, tissue therapy, cell characterization, and biosensors for biomarker detection.